Trouble Printing from Sawgrass Print Studio on Windows

The information below can help you resolve printing issues on Windows Operating System despite your printer showing 'Ready' status on the LCD panel.

 

Sawgrass Print Studio print job window is not appearing

If when using the Quick Print Folder, design tool, or Send to Sawgrass Print Utility to send files, the Sawgrass Print Utility window does not appear, please make sure that the application is running. You should see the Sawgrass Print Studio logo in your hidden icons located in the task bar as shown below. If it is not there, click on the Sawgrass Print Studio icon located on your desktop to start the program.

 

Nothing is being sent from the design tool to the Sawgrass Print Studio (Allowing popups in your Web Browser)

If when printing from the design tool, the Sawgrass Print Studio window is not appearing after clicking 'Print File', please ensure that you allow popups in your web browser. The design tool uses a popup to then open and send your design to the Sawgrass Print Studio. If popups are blocked then no prints will be sent. Note that you should only need to allow popups once, your browser should then remember the selection and allow popups from MySawgrass moving forward.

  1. in the design tool, click Print File.

     
  2. The popup blocker icon may appear. This means that the required print window has been blocked by your browser.

     
  3. Click on the Pop-ups blocked icon and then set it to Always allow popups, then click Done.
    Note that this example is in the Google Chrome browser, if you are using a different browser then your view may be slightly different, but still similar.

     
  4. The popup window will now appear. Tick always allow and click Open Sawgrass Sawgrass Print Studio. Allowing this will mean this window will not appear next time you print and instead will send your design directly to the Sawgrass Print Studio application without the need for any further interactions.

Also, as mentioned in the previous section, you need to make sure the Sawgrass Print Studio is running in order for the print job window to open.

Nothing Is Being Sent to the Printer

If you click Print in Sawgrass Print Studio but nothing is sent to your printer, there may be a communication issue between your computer and the printer.

Important: Before proceeding, ensure your printer is powered on, displays Ready on its LCD panel, and has no active errors. If the printer displays an error message or the red error indicator light is illuminated, it will be considered Offline until the error has been resolved.

 

Communication issues commonly occur when the printer's connection port changes or when the Wi-Fi signal is weak or unstable.

A printer's connection settings may change for several reasons, including:

  • The printer has been powered off for an extended period.
  • The USB cable has been disconnected or reconnected.
  • Your network router has been restarted.
  • Your router has assigned a new IP address to the printer.
  • A weak Wi-Fi signal is causing intermittent connection dropouts.

When this happens, your computer may no longer have the correct connection information to communicate with the printer.

The easiest way to resolve this is usually to remove and reinstall the printer through Sawgrass Print Studio. This allows the printer to be detected again using its current connection settings.

Check Your Wi-Fi Signal Strength (If Applicable)

If your printer is connected via Wi-Fi, check that the wireless signal is sufficiently strong to maintain a stable connection.

You can check the signal strength directly from the printer's control panel:

  1. Navigate to System Settings > Interface Settings > Wireless LAN > Wireless LAN Signal.
  2. Check the displayed signal strength.

We recommend a minimum Wi-Fi signal strength of 75% for a reliable connection.

If the signal strength is below 75%, try the following:

  • Move the printer closer to your wireless router.
  • Reduce any physical obstructions between the printer and router.
  • Alternatively, connect the printer directly to your router using an Ethernet cable or to your computer using a USB cable.

A weak or unstable Wi-Fi connection can cause the printer to temporarily disconnect, preventing print jobs from being sent successfully.

Restart Your Computer and Printer

Before making any changes to your printer installation, we recommend restarting both your computer and printer.

  1. Close Sawgrass Print Studio.
  2. Turn off your printer using its power button.
  3. turn off your computer.
  4. Turn on the printer and wait until it displays Ready on its LCD panel.
  5. Turn your computer back on.
  6. Open Sawgrass Print Studio and try printing again.

Restarting both devices can help resolve temporary communication issues and re-establish the connection between your computer and printer.

If the issue persists, continue with the steps below

Remove and Reinstall the Printer Driver

If your printer appears as Offline in Sawgrass Print Studio, its connection port or network address may have changed.

The simplest solution is to remove the existing printer installation and add it again.

To do this:

  1. Open Sawgrass Print Studio.
  2. Navigate to Settings > Printers.
  3. Remove the affected printer from the system
  4. Add the printer again, following the installation instructions.

Reinstalling the printer allows the computer to re-establish a connection using the printer's current settings.

For detailed instructions, see: Adding or Reinstalling a Sawgrass Printer Driver